Seal the ends of your multiwall polycarbonate roofing sheets with our polycarbonate tape and end closures. The hollow flutes in twinwall, triplewall and multiwall sheets must be sealed before fitting. If they are left open, dust, insects and condensation get inside and leave green algae and dirty streaks that can't be cleaned out. Solid aluminium tape seals the top end, breather tape seals the bottom end, and a PVC end closure caps the bottom edge for a neat, drained finish. Everything is sized for 10mm, 16mm and 25mm sheets.
What's available
| Item | Where it goes | Sizes |
|---|---|---|
| Solid aluminium tape | Top end of the sheet | 5m length or 45m roll |
| Breather tape (anti-dust filter tape) | Bottom end of the sheet | 5m length or 33m roll |
| Aluminium and breather tape set | Top and bottom ends | 5m of each |
| PVC end closure | Over the breather tape at the bottom edge | 1.05m length, white or brown |
Choose the thickness that matches your sheets so the tape wraps the edge properly and the end closure fits snugly.
Why polycarbonate sheets need sealing
Multiwall polycarbonate gets its strength and insulation from hollow flutes running the length of the sheet. Left open, the flutes pull in dust and moisture, and once algae starts growing inside it can't be removed. Aluminium tape closes the top end completely. Breather tape at the bottom lets condensation drain and air move while keeping dust and insects out. The end closure protects the breather tape and gives a clean edge with drainage.
How to fit polycarbonate tape and end closures
- Cut the sheets to length and blow or vacuum any swarf out of the flutes.
- Peel the protective film back slightly at each end and wipe the edges clean and dry.
- Apply aluminium tape across the full top edge, folding it evenly over both faces.
- Apply breather tape across the full bottom edge in the same way. Never use solid tape at the bottom.
- Push a PVC end closure over the breather-taped bottom edge.
- Fit the sheets with the flutes running down the slope.
How much do I need?
Add up the width of all the sheets across the roof. You need that length of aluminium tape, the same length of breather tape, and enough 1.05m end closures to cover the bottom edge. Example: a 3m-wide carport needs a 5m set of tape and three end closures. For bigger roofs or several projects, the 45m and 33m rolls work out cheaper.
Buying our polycarbonate roofing sheets? They already come with aluminium and breather tape to suit the sheets you order. Use these for spares, repairs and re-sealing old roofs.
Delivery
Tapes come with free UK mainland delivery, typically 3–5 working days. PVC end closures are delivered with our polycarbonate sheets and glazing bars: a flat £29.99 per order, free on orders over £300, so add them to the same basket.
Complete your polycarbonate roof
Fix the sheets with polycarbonate glazing bars and choose your sheets from our 10mm, 16mm and 25mm polycarbonate roofing sheets.
