Our treated timber is rough sawn, pressure-treated (tanalised) softwood in every common UK size from 2x2 to 10x2. It is graded C16 for general framing and C24 for structural work, in lengths from 2.4m to 4.8m. Choose your size and length above. The table below shows exactly which lengths are available in each size. Palletised UK mainland delivery is £25, typically 2–5 working days.
Treated timber sizes and lengths
| Trade size | Actual sawn size | Grade | Lengths available |
|---|---|---|---|
| 2x2 | 47 x 50mm | C16 | 3m, 3.6m, 4.8m |
| 3x2 | 47 x 75mm | C16 | 3m, 3.6m, 4.8m |
| 4x2 | 47 x 100mm | C24 | 2.4m, 3m, 3.6m, 4.2m, 4.8m |
| 5x2 | 47 x 125mm | C24 | 2.4m, 3m, 3.6m, 4.8m |
| 6x2 | 47 x 150mm | C24 | 2.4m, 3m, 3.6m, 4.2m, 4.8m |
| 7x2 | 47 x 175mm | C24 | 3m, 3.6m, 4.2m, 4.8m |
| 8x2 | 47 x 200mm | C24 | 3m, 3.6m, 4.2m, 4.8m |
| 9x2 | 47 x 225mm | C24 | 4.2m, 4.8m |
| 10x2 | 47 x 250mm | C24 | 3.6m, 4.8m |
The trade size is the old imperial name in inches, while the actual size is the metric section you receive. Many merchants call 4x2 "100 x 50" and 6x2 "150 x 50". These are the same sections, sold under rounded metric names.
10x2 timber (47 x 250mm, C24)
10x2 timber is the deepest section we stock: 47 x 250mm, C24 structural grade and tanalised, in 3.6m and 4.8m lengths. It is used for floor joists on longer spans, deck bearers, beams, ridge boards and heavy pergola frames. We don't currently stock 12x2 (47 x 300mm). For spans beyond what 10x2 can carry, have a structural engineer or building control specify the section.
C24 timber: structural sizes for joists, rafters and beams
C24 timber is the higher-strength structural grade. It is specified for roof rafters, floor and ceiling joists, timber-frame studs, wall plates and load-bearing beams. We supply it in 4x2, 5x2, 6x2, 7x2, 8x2, 9x2 and 10x2. As a rough guide:
- 4x2 suits studs, wall plates, deck sub-frames and short ceiling joists.
- 5x2 to 7x2 suit rafters, deck joists and garage or shed roofs.
- 8x2 to 10x2 suit floor joists and bearers on longer spans.
Joist size and spacing must come from span tables or your structural specification. This guide does not replace them.
C16 timber: general-purpose 2x2 and 3x2
C16 timber is general-purpose graded softwood for battens, noggings, bracing, fence rails, greenhouse and shed frames, and non-load-bearing framing. We stock it in 2x2 (47 x 50mm) and 3x2 (47 x 75mm). If you need planed timber with rounded edges for internal stud walls, see our CLS studwork timber.
Tanalised timber for outdoor use
Every length is tanalised, which means preservative is forced deep into the grain under pressure. This gives the familiar green tint and long-term resistance to rot, fungi and insect attack. Our timber is treated to Use Class 3, which covers outdoor use above ground: decking sub-frames, fence rails, pergolas, sheds, raised-bed frames and cladding battens. Use Class 3 is not rated for ground contact, so for posts set in soil or concrete use a ground-contact (Use Class 4) post such as our treated fence posts. Treat any cut ends with an end-grain preservative to keep the protection continuous.
Rough sawn vs planed timber
This is rough sawn timber. It is left with its sawn finish rather than planed, so it keeps the full listed section. Planed timber such as CLS is smaller once finished. Rough sawn is the standard for structural and outdoor work, where strength and section matter more than a smooth face.
Specification
| Material | Softwood |
| Grade | C16 (2x2, 3x2) or C24 (4x2 to 10x2) |
| Treatment | Tanalised, pressure treated to Use Class 3 |
| Finish | Rough sawn, full section |
| Lengths | 2.4m, 3m, 3.6m, 4.2m, 4.8m (by size) |
| Delivery | £25 palletised, 2–5 working days (mainland UK) |
Related timber and decking
Building a deck? Pair the sub-frame with our 32mm reversible decking boards or composite decking, or browse all decking boards. For sheet materials, see OSB3 boards and the full timber and boards range.
Delivery
£25 palletised delivery to mainland UK, typically 2–5 working days. Excludes Northern Ireland, the Scottish Highlands and islands. Lengths up to 4.8m need clear access for the delivery vehicle and someone available to help offload.