32mm grooved reversible decking boards in pressure-treated softwood, available in 125mm and 150mm widths and lengths from 3m to 4.8m. UC3-graded and green-treated for outdoor durability, with a reversible grooved/smooth profile giving you the choice of anti-slip ridged or clean smooth finish from the same board. Ideal for garden decking, balconies, steps, raised platforms and walkways. Boards, with 3-5 working day UK delivery.
Reversible Grooved Profile
Each board is machined with a grooved face on one side and a smooth face on the other. The grooved side gives the traditional anti-slip decking finish, with channels that help water run off - the classic choice for garden decks where grip matters. The smooth reverse face gives a cleaner, more contemporary look, ideal for covered areas or where you want a flatter walking surface. You get both options in one board, so you can choose at install time or even mix the two on the same deck for visual interest.
Technical Specification
| Thickness | 32mm (nominal) |
| Widths available | 125mm, 150mm (nominal) |
| Lengths available | 3m, 3.6m, 4.2m, 4.8m |
| Profile | Reversible - grooved one face, smooth other face |
| Treatment | UC3 pressure-treated (green) |
| Material | Pressure-treated softwood, machined |
| Joist centres | 400mm recommended for 32mm boards |
| Lead time | 3-5 working days (mainland UK) |
UC3 Pressure Treatment
UC3 (Use Class 3) is the British Standard treatment level for timber used outdoors above ground - the correct specification for decking, fence boards and exterior cladding. These boards are pressure-treated with a copper-based preservative forced deep into the timber, protecting against rot, fungal decay and insect attack. Treat any freshly cut or drilled areas with a suitable end-grain preserver on site to maintain full protection.
This Range
| Width x Length |
| 125mm x 3m |
| 125mm x 3.6m |
| 125mm x 4.2m |
| 125mm x 4.8m |
| 150mm x 3m |
| 150mm x 3.6m |
| 150mm x 4.2m |
| 150mm x 4.8m |
Common Uses
Garden decking and patios, raised platforms and seating areas, balconies and walkways, pool and hot tub surrounds, steps, edging and built-in benches. The 32mm thickness suits domestic and light commercial decking on joists at 400mm centres.
Installation Notes
Lay boards across pressure-treated decking joists at 400mm centres (recommended for 32mm boards). Leave a 5-6mm expansion gap between boards to allow for movement. Fix with stainless steel or coated decking screws and pre-drill near board ends to prevent splitting. For best longevity, raise the deck off the ground and ensure good airflow underneath.
Finish and Weathering
As a natural pressure-treated softwood product, boards may show variation in colour, grain, knots and moisture content - this is normal and not a defect. The green treatment colour will weather to a silvery grey over time unless you apply a coloured decking stain or oil. For colour retention, treat the boards with a quality decking oil or stain annually.
Need a Different Spec?
We can also source 38mm thick decking boards on request for heavy-duty builds and commercial applications. Please contact us if you need 38mm or any other size not shown.
Delivery Information
Lead times are currently 3-5 working days to mainland UK addresses. The 4.2m and 4.8m boards are bulky items, so suitable delivery access is required and someone available to help with offloading. Boards are delivered banded together for safe handling.