Our uPVC soffit boards close off the underside of the eaves between the fascia and the wall, giving a neat, maintenance-free finish that won't rot or need painting. Choose from flat soffit board, hollow tongue and groove soffit or vented soffit with built-in ventilation slots, all 9mm thick and 5 metres long. White is available in every width, and the most popular sizes also come in black ash, anthracite grey, golden oak and rosewood to match your uPVC fascia boards.
Which soffit board do I need?
- Flat soffit board: a solid 9mm uPVC board in widths from 100mm to 605mm. It is the standard choice for most eaves and is cut to the depth of your overhang. It also works as a general-purpose utility board for window reveals and boxing in.
- Hollow soffit board: 100mm or 300mm tongue and groove panels that slot together to cover deep overhangs, porch ceilings, carports and wider soffits. Use a starter trim at the wall and a joint trim between runs.
- Vented soffit board: a flat board with a continuous strip of ventilation slots along one edge. It ventilates the roof space to prevent condensation, which is required on most roofs where the loft is insulated.
uPVC soffit board specification
| Type | Thickness | Length | Widths |
|---|---|---|---|
| Flat soffit board | 9mm | 5m | 100–605mm |
| Hollow soffit board | 9mm | 5m | 100mm and 300mm panels |
| Vented soffit board | 9mm | 5m | 150–450mm |
How to measure for soffit boards
- Width: measure from the back of the fascia to the wall. Choose the next width up and trim it to fit. For hollow soffit, divide the depth by the panel width to work out how many panels you need across.
- Length: measure the total run of the eaves, divide by 5m and round up.
- Ventilation: on most roofs you need vented soffit or over-fascia vents along both eaves. If in doubt, use vented soffit boards.
How to fit uPVC soffit boards
- Fit soffit boards before the fascia, so the lip of the fascia covers the front edge of the soffit.
- Fix to the soffit bearers with stainless steel plastic-headed pins at around 600mm centres.
- Leave a 5mm expansion gap at each join and cover it with a soffit joint trim.
- For hollow soffit, fit a starter trim against the wall, then slot each panel into the last and pin through the tongue so the fixings are hidden.
- Fit the fascia board over the front edge of the soffit, then refit the gutter.
Delivery
Soffit boards are delivered in full 5m lengths by specialist courier, typically in 2–5 working days. Delivery is a flat £19.99 per order to UK mainland addresses, shared with any fascia boards in the same basket, and free on orders over £150. We cannot deliver to Northern Ireland or the Isle of Wight.
Complete your roofline
Add matching uPVC fascia boards in 9mm capping or 18mm replacement, and finish with soffit joints, board clips, corners and fascia pins.
Working on the whole roof? See our EPDM rubber roofing membrane for flat roofs and extensions, or browse the full roofing range.
