Worktop Thickness Guide: 20mm vs 28mm vs 38mm Solid Wood Worktops
Share
Quick answer: for a full kitchen run on standard base units, a 38mm solid wood worktop is the safe default. It's the strongest and most stable, it gives the most material for undermount sink fixings and breakfast-bar overhangs, and it's the most common UK worktop thickness. 28mm gives a slimmer, more modern edge and is lighter to handle, but it needs better support. 20mm is best kept for shelves, upstands, windowsills and small, fully supported tops, not a whole kitchen. This guide compares all three, with a weight calculator for your exact size.

Worktop Weight Calculator
Work out how heavy your worktop will be before it arrives, so you know whether it's a one-person or two-person lift. Enter the size, thickness and wood.
Approximate, based on typical air-dried densities (oak and beech ~720kg/m³, ash ~690kg/m³, iroko ~650kg/m³, walnut ~640kg/m³). Real weight varies with moisture content and grain.
20mm vs 28mm vs 38mm Worktops at a Glance
| 20mm | 28mm | 38mm | |
|---|---|---|---|
| Look | Very slim, minimal edge | Slim, contemporary | Classic, substantial |
| Best use | Shelves, upstands, windowsills, desks, small supported tops | Kitchen runs on well-supported units, utility rooms, slim islands | Full kitchens, islands, breakfast bars, undermount sinks |
| Stiffness / stability | Lowest: more prone to cupping if unsupported | Good when fully supported | Highest: the most forgiving |
| Undermount sink | Not recommended | Possible, but less material for fixings | Best choice |
| Breakfast-bar overhang | Only with full support | Small overhangs, supported | Best for overhangs (support larger ones) |
| Approx. weight (oak, 3m × 620mm) | ~27kg | ~37kg | ~51kg |
Weights are approximate, based on oak at around 720kg/m³. Beech is similar to oak. Walnut, iroko and ash are a little lighter.
38mm: The Standard Kitchen Worktop Thickness
38–40mm is the most common UK kitchen worktop thickness, and most standard kitchen layouts and appliance heights are planned around it (always check your appliance makers' fitting dimensions). That's why a 38mm solid oak worktop is the safest choice for a full kitchen.
Why choose 38mm
- Stiffness. A thicker board is stiffer and more forgiving over unit gaps. All solid wood still moves with moisture, so seal every face and leave expansion gaps.
- Undermount sinks. More thickness means more material for sink clips. Always follow the sink maker's fixing instructions, support the sink properly and seal the cut-out edges thoroughly.
- Overhangs. A breakfast bar or island overhang is stiffer in 38mm. Support any larger overhang with brackets or legs.
- Longevity. More timber to sand back over the years before you'd ever need to replace it.

38mm is available in oak, beech, walnut and iroko. Weighing up iroko? See our iroko worktop guide.
28mm: Slimmer and More Modern
A 28mm oak worktop (sometimes sold as 27mm) gives a lighter, more contemporary edge profile. It's popular in modern shaker and handleless kitchens, utility rooms and smaller spaces.

What to check with 28mm
- Support it properly. Make sure every unit is level and the worktop is supported along its length and at the back. Add battens on long spans or over wide appliance gaps.
- Height. It sits about 10mm lower than a 38mm top. Usually that's not an issue, but check appliance clearances and adjust the unit legs if you want to match the standard height.
- Sinks. Inset (top-mount) sinks work well. Undermount is possible but leaves less material for fixings, so check the sink maker's fixing system. 38mm is the safer choice if an undermount sink is a must.
- Handling. Around 25–30% lighter than 38mm, so easier to carry and fit.
Also available in 28mm beech and 28mm ash. Not sure between oak and beech? Read oak vs beech worktops.
20mm: Shelves, Upstands and Windowsills
A 20mm solid oak board is the go-to for jobs where a full worktop would look heavy:
- Floating shelves and alcove shelving
- Upstands and splashbacks that match an oak worktop
- Windowsills
- Desks, vanity tops and small, fully supported surfaces

We don't recommend 20mm for a full kitchen run on standard base units. It's more prone to movement over long spans, it gives sink and hob fixings very little to grip, and any overhang needs full support underneath.
Which Thickness Should You Choose?
- Full kitchen, undermount sink or breakfast bar → 38mm
- Modern slim look, inset sink, well-supported units → 28mm
- Shelves, upstands, windowsills, small tops → 20mm
- Matching set → 38mm or 28mm worktop with 20mm upstands and shelves in the same wood
Cutting and Finishing
Every thickness can be cut to your exact length or width with our worktop cutting service (£10 per straight cut). Message us your sizes for sink and hob cut-outs. Cut-to-size pieces are made to order and can't be returned. Standard sizes can be returned within 14 days.
Whatever the thickness, oil every face and edge before fitting, especially the underside and end grain. Our step-by-step guide to oiling a wooden worktop includes an oil calculator, and our food-safe worktop oil works on every wood we sell.
Buy Solid Wood Worktops at Rackerman
Real full-stave hardwood worktops, cut to size on request, with free delivery to mainland England (surcharge for Wales, Cornwall, Devon and Scotland, shown at checkout):
- Solid oak worktop 38mm, 28mm and 20mm
- Solid beech worktop 38mm and 28mm
- Solid walnut worktop 38mm
- Solid iroko worktop 38mm
- Solid ash worktop 28mm
- Food-safe worktop oil and the worktop cutting service (£10 per straight cut)
Browse all solid wood worktops → · Ask about cut-outs or trade quotes →
Embed This Calculator on Your Website
Run a building, fabrication, landscaping or DIY website? You can add this free Worktop Weight Calculator to your own page. Paste the code below into a Custom HTML block (WordPress), an HTML embed (Wix, Squarespace, Webflow) or straight into your page. It is free to use — all we ask is that you keep the credit link to Rackerman.
Frequently Asked Questions
What is the standard thickness of a kitchen worktop in the UK?
38–40mm is the most common thickness, and most standard kitchen layouts are planned around it. 28mm is also widely used for a slimmer look.
Is a 28mm worktop thick enough for a kitchen?
Yes, as long as it is fully supported on level units with extra battens over wide gaps. It suits inset sinks and a slimmer modern look. Choose 38mm for undermount sinks or overhangs.
Can I use a 20mm worktop in a kitchen?
For small, fully supported tops, shelves and upstands, yes. For a full kitchen run on standard base units, 28mm or 38mm is the better choice.
Is 27mm the same as 28mm?
Effectively, yes. Suppliers describe the same slim worktop as 27mm or 28mm depending on the finished sanding thickness.
Which thickness is best for a breakfast bar?
38mm. It's the stiffest option for an overhang. Support larger overhangs with brackets or legs sized for the overhang depth and load.
How heavy is a solid oak worktop?
Roughly 51kg for a 3m × 620mm × 38mm oak board, around 37kg at 28mm and around 27kg at 20mm. Use the weight calculator above for your exact size.
Can a 38mm worktop sit on standard kitchen units?
Yes. A 38mm solid wood worktop fits standard UK base units. Check your appliance makers' fitting dimensions for the finished worktop height.