Re-roof or repair your garden building with our shed felt – a heavy duty mineral roofing felt made in the UK, available in modern black or traditional green and supplied 1m wide in lengths from 1m to 8m, so you only buy what your roof needs. The bitumen felt has a hard-wearing mineral-granule top surface that is waterproof, weather resistant and UV resistant, giving a neat finish to sheds, summerhouses, workshops, log stores, bike stores, kennels and hutches. Free UK mainland delivery.
Shed Felt Specification
| Specification | Detail |
|---|---|
| Product | Heavy duty mineral shed roofing felt |
| Material | Bitumen felt with mineral-granule surface |
| Colours | Black (charcoal), Green |
| Width | 1m |
| Lengths | 1m, 2m, 3m, 4m, 5m, 6m, 7m, 8m |
| Properties | Waterproof, weather resistant, UV resistant |
| Fixing | 13mm galvanised clout nails and/or felt adhesive (not included) |
| Use | Pitched and pent roofs on non-habitable garden buildings |
| Country of manufacture | United Kingdom |
Black or Green Shed Felt?
Black shed felt gives a clean, modern charcoal finish that suits contemporary sheds, garden offices and painted timber. Green shed felt is the traditional choice that blends into planting and lawns and matches older garden buildings. Both have the same mineral-surfaced bitumen construction and are fitted the same way.
Uses for Shed Roof Felt
Mineral roofing felt is the quickest and most economical way to waterproof the roof of a timber garden building. It is used to felt new sheds, re-felt old shed roofs that have cracked or blown off, and repair patches on summerhouses, playhouses, log stores, bin and bike stores, dog kennels, rabbit hutches and chicken coops. The 1m width suits standard shed roof boarding, and buying the exact length saves waste on small roofs and repairs.
Want a roof that lasts longer than felt? For flat and low-pitched roofs, upgrade to one-piece EPDM rubber roofing membrane. For pitched sheds, corrugated bitumen roofing sheets and metal roofing sheets are tougher alternatives. Re-boarding the roof first? Use OSB3 boards.
How to Felt a Shed Roof
- Strip off the old felt and nails, replace any rotten or soft roof boards and make sure the roof is clean and dry.
- Unroll the felt and let it relax in the sun for around 30 minutes so it lies flat.
- Start at the eaves: lay the first strip along the bottom edge with a 50mm overhang and nail along its top edge at about 50mm centres with 13mm galvanised clout nails.
- Lay each following strip so it overlaps the one below by at least 75mm, sealing the overlap with felt adhesive before nailing.
- On apex roofs, finish with a ridge strip lapped over both sides, then fold the overhangs down over the edges and fit fascia or barge boards to hold them neatly.
How Much Roofing Felt Do I Need?
Measure each roof slope from ridge to eaves, add 50mm for the overhang and divide by 0.925m (1m width less a 75mm overlap) to get the number of strips. Multiply by the roof length plus 100mm for the overhangs at each end. As a guide, a 6ft x 4ft shed needs about 4–5m, an 8ft x 6ft apex shed about 7–8m. For larger roofs, order two lengths.
Delivery and Lead Time
Shed felt is delivered free to UK mainland addresses by courier, typically within 2–4 working days.
