These corrugated bitumen roof sheet fixings are the correct nails for fixing bitumen roofing sheets to timber battens, purlins or a boarded deck. Each fixing is a 2.8mm x 70mm galvanised countersunk nail with a waterproof PE sealing washer that compresses onto the crown of the sheet as you drive it home, sealing the hole against rain. They suit our corrugated bitumen roofing sheets and other corrugated bitumen sheets of the same type. Choose a box of 50, a box of 200, or a twin pack of 400.
Bitumen sheet fixing specification
| Nail size | 2.8mm diameter x 70mm long |
| Nail finish | Galvanised steel, countersunk head |
| Washer | Black waterproof PE sealing washer, pre-fitted |
| Pack sizes | 50, 200 or 400 (2 x 200) |
| Fixing instructions | Leaflet supplied in every box |
| Suitable for | Corrugated bitumen roof sheets on timber battens, purlins or boarding |
How many roofing nails do I need?
Allow around 20 fixings per bitumen sheet. A typical 8x6 shed roof using 8 sheets needs about 160 fixings, so a box of 200 covers it with spares. A box of 50 is enough for 2 to 3 sheets or for repairs, and the 400 pack suits larger sheds, stables and field shelters of around 20 sheets.
| Sheets | Fixings needed | Pack to order |
|---|---|---|
| 1–2 | Up to 40 | Box of 50 |
| 3–10 | 60–200 | Box of 200 |
| 11–20 | 220–400 | Pack of 400 |
How to fix corrugated bitumen roof sheets
- Always nail through the crown: drive the nail into the top of the corrugation, never the valley, where water runs.
- Fix the edges first: two rows of nails across the head and foot of each sheet, and down each side where sheets overlap.
- Then fix every third corrugation on each intermediate batten.
- Don't over-drive: stop when the washer seats firmly on the sheet. Driving too hard can crush the corrugation and break the seal.
- Use a pilot hole on cold days: bitumen sheets are stiffer in the cold, so a small pilot hole helps the nail go in cleanly.
Why use proper bitumen sheet fixings?
Ordinary clout nails or screws without washers leave an open hole in the sheet and will leak. These fixings have a long 70mm shank to reach through the sheet into the batten, a galvanised finish that won't rust and stain the roof, and a sealing washer that keeps water out for the life of the roof.
Delivery
Free UK mainland delivery by Royal Mail, typically 2–4 working days.
Complete your roof
Finish the job with matching bitumen ridges, gable angles and wall flashings, and seal the eaves with corrugated eaves fillers. Need sheets? See our corrugated bitumen roofing sheets in black, green, red, brown and clear.
